Product Description
BLUETTI EB70 Portable Power Station | 1000W 716Wh
Stay Powered, Wherever Life Takes You
The EB70 portable power station packs the 1000W AC inverter and 716Wh LiFePO4 battery, great for outdoor adventure, camping, hiking, fishing, emergency and much more.
Features:
- 1000W AC Pure Sine Wave Inverter (1,400W Surge)
- 716Wh Capacity
- LiFePO4 Battery with 2,500+ Life Cycles to 80%
- 10 Outputs For Multiple Devices
- 4 Ways to Recharge (AC/Solar/Car/Generator)
- 200W Max. Solar Input
- Eco-friendly/Gas free/Quiet/Cost-effective
Battery Info:
- Capacity: 716Wh (22.4V, 32Ah)
- Type: LiFePO4 (Lithium Iron Phosphate)
- Life Cycles: 2,500+ Cycles to 80% Original Capacity
- Shelf-life : Recharge to 80% Every 3-6 Months
- Management System: MPPT Controller, BMS, etc.
Output:
- AC Outlets : 2 x 220-240v AC Outlets, 1000W In Total
- Inverter Type: Pure Sine Wave
- Surge Power: 1,400W
- USB-C Port: 2 x 100W Max.
- USB-A Port: 2 x 5V/3A
- 12V DC Outlets: 1 x 12V/10A (Car Outlet)
- 2 x 12V/10A (DC5521)
- Wireless Charging Pad: 1 x 15W Max.
Input
- AC Adapter Input: 200W Max.
- Solar Input: 200W Max. OCV 12-28V, 8A
- Car Input: 12/24V from Cigarette Lighter Port
Recharge Times:
- AC Adapter (200W): ≈4-4.5 Hours
- Solar (200W): ≈4-4.5 Hours (With prime sunshine, ideal orientation and low temperature)
- 12V/24V Car Outlet(100W/200W): ≈7.5 or 4.0 Hours
General:
- 240V Split Phase Bonding : No. Need 240V power source.
- Scalability : No. Refer BLUETTI expandable power stations
- Pass-through Charge : Yes
- Weight: 9.7 kg (21.4lb)
- Dimensions (LxWxD): 32cm x 21.6cm x 22.1cm (12.6*8.5*8.7 inches)
- Operating Usage Temperature: -10 - +40°C (-4-104°F)
- Storage Temperature : -10 - +45°C (14-113°F)
- Certification: CEC, DOE, FCC, QC3.0, CA Prop 65
- Warranty: 24 Months
In the Box
- 1x EB55 Power Station
- 1x AC Adapter + Charging Cable
- 1x Car Charging Cable
- 1x Solar Charging Cable
- 1x User Manual
- 1x Warranty Card
Manufacturers Info (Click on link and a new web page will open)
Bluetti EB70 Portable Power Station Manual
FAQS
Question 1: How do I know whether my appliance can work well with the EB70?
Answer:
- Calculate the total wattage of your devices. EB70 should work if the load doesn't exceed its rated 1000W.
- Friendly Note: For some devices with motor / compressor built inside, the instant start-up power may be 2-4 times more than the rated power, which may exceed the upper limit of the EB70.
Answer:
- Working time (estimation) = 716Wh* 0.85 / operating power of your device. (0.85=Conversion Rate)
- Please note that the actual working time may vary under different situations.
Answer:
PV input requirements for EB70:
Question 6: What is the maximum input charging power of the BLUETTI EB70?
- 1) Open Circuit Voltage (OCV) between 12V-28V; MAX input current: 8A; Input Power: 200W Max.
- 2) Equipped with MC4 Connector. If your panel has an Anderson connector, please purchase Anderson to MC4 cable, separately.
- 1) 1*BLUETTI PV200 (200W), fully recharge from 0-100% ≈4hrs*.
- 2) 1*BLUETTI PV120 (120W), fully recharge from 0-100% ≈6.5hrs*.
- The actual charging time depends on the weather, solar condition, and the angle of the solar panels.
- Yes, the EB70 supports pass-through charging; equipped with the premium LiFePO4 battery and the advanced Battery Management System, just feel free to use it the way that better suits your needs.
- Running time = Battery capacity × DoD × η ÷ Device rated power
- DoD refers to Depth of Discharge and η is local inverter efficiency.
- For EB70, both DoD and η are 90%. If you run a 500W blender with it, the running time will be: 716Wh × 90% × 90% ÷ 500W ≈ 1.2hrs
- 1) The formula is NOT suitable for inductive loads with compressors, like refrigerator, air conditioner, etc.
- 2) The above data is for reference ONLY.
Answer:
- 200W Max.
Question 7: Is the EB70 power station waterproof
Answer:
- No. Also, please do NOT store it in a humid environment for a long time.
Answer:
- Temperature ranges for EB70S are:
- Charge: 0-40℃ (32-104℉);
- Discharge: -20-40℃ (-4-104℉);
- Storage: -20-40℃ (-4-104℉).
- Technically, it can power electrical devices under such situations, but please avoid charging it.
Answer:
- No. Long-term placement will make the internal structure loose, it is recommended to place the machine upright.
Answer:
- No.
Answer:
- No.
