Product Description
Bluetti Portable Power Station AC200P 2000W 2000Wh LiFePo4
Stay Charged, Anywhere, Anytime 2000W/2000Wh Power Station
No matter where you are - at home during an unexpected outage, in your backyard, on a worksite, in the outback, or on a road trip, you can always count on BLUETTI AC200P as your reliable off-grid power source.
Features:
- 2000W AC Pure Sine Wave Inverter (4,800W Surge)
- 2,000Wh Capacity
- LiFePO4 Battery with 3,500+ Life Cycles to 80%
- 13 Outputs For Multiple Devices
- 7 Ways to Recharge (AC/Solar/Car/Generator/Lead battery/Dual AC/AC+Solar)
- 700W Max. Solar Input
- 1200W Max. Fast Dual Charging (Solar + AC Adapter Simultaneously)
- Eco-friendly/Gas free/Quiet/Cost-effective
Battery Info:
- Capacity: 2000Wh (50V, 40Ah)
- Cell Chemistry: LiFePO4 (Lithium Iron Phosphate)
- Lifecycle: 3,500+ Cycles to 80% Original Capacity
- Management System: MPPT Charge Controller, Low Battery Protection
- Shelf-Life: Charge Every 3-6 Months
Output:
- AC Output: 2 x 220V-240V Receptacle, 2,000W In Total
- Inverter Type: Pure Sine Wave
- Surge Power: 4,800W
- USB-C Port: 1x 60W Max
- USB-A Port: 4x 5V/3A
- 12V* DC Outlets: 1 x 12V/25A (RV Outlet)
- 1x 12V/10A (Car Outlet)
- 2x 12V/3A (5.5mm Outlet)
- *All Regulated.
- Wireless Charging Pad: 2x 15W Max. (For Each)
Input:
- AC Adapter Input: 400W Max
- Solar Input: 700W Max OCV 35-150V, 12A
- Car Input: 12/24V from Cigarette Lighter Port
- Maximum Input: 1100W, with AC and Solar Input Simultaneously
Recharge Times:
- AC Adapter (400W): 5.5-6 Hours
- Solar (700W): 3.5-4 Hours (With prime sunshine, ideal orientation and low temperature)
- 12V/24V Car Outlet (100W/200W): 10 or 20 Hours
- AC + Solar (1100W): 2.3-2.8 Hours (With prime sunshine, ideal orientation and low temperature)
- Dual AC (800W): 3-3.5 Hours (With Optional Dual Adapters)
General:
- Scalability: No. Enter for expandable BLUETTI power stations
- Simultaneous Recharge & Discharge: Yes
- Weight: 27.5kg (60.6 lbs)
- Dimensions (LxWxD): 42cm x 28cm x 38.65cm (16.5 x 11 x 15.2 inches)
- Operating Temperature: 0-40°C (32-104°F)
- Storage Temperature: -10-45°C (14-113°F)
- Certification: UL, CEC, DOE, FCC, CA Prop 65
Warranty: 24 Months
Manufacturers Info (Click on link and a new web page will open)
Bluetti AC200P Portable Power Station Manual
Power All Your Needs Simultaneously
Solar Solution for Home Applications
Power Your Adventure
Enjoy Nature With Peace of Mind
FAQS:
Question 1: How can I connect AC200P with B230 or B300 expansion battery?You can connect 1 B230 or B300 battery pack with AC200P via the P090D to XT90 cable*. * Sold separately
- We suggest to chain at least 3pcs SP200 200W/3pcs SP120 /2pcs SP350 solar panel in series, and 5pcs at the most.
- For professional solar user, you can connect SP200 4S2P(total 8pcs) to reach the max.700W. (the parallel cable need to buy separately)
Tips: Single BLUETTI SP120 or SP200 will not charge AC200P, We recommend at least 3 pcs BLUETTI SP120(120W solar panel) or BLUETTI SP200(200W solar panel) in series to charge AC200P!!!!!
Question 3: What kind of solar panels should I choose for AC200P?We recommend to choose solar panel that meets below:
- 1) open circuit voltage between 35-150v(OCV, whatever you connect the panel in series or in parallel), Max.700W, Max.12A
- 2) MC4 Connector (if your solar panel has an anderson connector, you need to buy a anderson to mc4 charging cable)
Note: Total OCV below 35V or above 150V will trigger low-voltage/over-voltage protection. AC200P only receive 700W/12A(Max.) if total input power /current exceed 700W/12A.
The recharge time various from different factors such as weather condition, the actual input solar power, temperature, angle, etc.
Highly Recommended:
- 5x BLUETTI PV120: ≈4hrs.
- 3x BLUETTI PV200: ≈4hrs.
- 2x BLUETTI PV350: ≈3.6hrs.
* For reference ONLY.
Question 4: How long is the MC4 cable?
- Running time = Battery capacity × DoD × η ÷ Device rated power
- DoD refers to Depth of Discharge and η is local inverter efficiency.
- For AC200P, both DoD and η are 90%. If you run a 1,000W microwave oven with it, the running time will be:
- 2,000Wh × 90% × 90% ÷ 1,000W ≈ 1.6hrs
Note:
- 1) The formula is NOT suitable for inductive loads with compressors, like refrigerator, air conditioner, etc.
- 2) The above data is for reference ONLY.
It depends on the loads AC200P carries.
- Load<1500W, 45dB Max., just like the sound generated from a working refrigerator;
- Load>1500W, 54dB Max., just like the sound generated from a percolating coffee-maker.
Temperature ranges for AC200P are:
- Charge: 0-40℃ (32-104℉);
- Discharge: -20-40℃ (-4-104℉);
- Storage: -20-40℃ (-4-104℉).
Technically, it can power electrical devices under such situations, but please avoid charging it.
- 1) Output power and capacity: 2,000W AC power and 2,048Wh capacity for AC200MAX, while 2,000W and 2,000Wh for AC200P.
- 2) Max. Input: 1,400W for AC200MAX, while 1,200W for AC200P.
- 3) App Control: AC200MAX supports BLUETTI App control.
Product Videos
Videos Hide Videos Show Videos
-
BLUETTI AC200P 2000w LiFePO4 Solar Generator! 2000wh Off Grid Portable Power Station Review
The Professor reviews the Bluetti AC200P battery generator (an...
-
Reviewing the Bluetti AC200P Solar Power Station
We have been using the Bluetti Solar Power station exclusively...
-
Bluetti AC200P and the Bluetti DC Charge Enhancer D050S: Increase your solar charging options!
I show how I will integrate the Bluetti DC Charge Enhancer to ...
-
BLUETTI AC200P | Battery Expansion
Tutorial of connecting AC200P series power station with BLUETT...
-
Best in-car/4WD portable battery power bank? Bluetti AC200P review | Auto Expert John Cadogan
Save thousands on any new car (Australia-only): https://autoex...